Sampling frequency rate - External

44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, +4.1667%, +0.1%, –0.1%, –4.0% (±200 ppm)

Signal delay

Less than 1.7 ms, Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz, Dante Receive Latency set to 0.25 msec

Total harmonic distortion

Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600Ω, Fs= 48 kHz, Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600Ω, Fs= 96 kHz, INPUT to OUTPUT, Input Gain= Min.

Frequency response

+0.5, –1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz / +0.5, –1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz

Dynamic range

112 dB typ., DA Converter, 108 dB typ., INPUT to OUTPUT, Input Gain= Min.

Hum & noise level - Equivalent input noise

–128 dBu typ., Input Gain= Max.

Hum & noise level - Residual output noise

–88 dBu, ST master off

Crosstalk

-100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB, @1 kHz *Measured with a 30dB/octave filter @22kHz

Power requirements

100-240V, 50/60Hz

Power consumption

72W

Accessories

Owner’s Manual, AC power cord (250cm)

Dimensions (WxHxD)

480 x 132 x 368mm

Net weight

9,6 kg

NC Value

FAN MODE LOW: NC=15 / HIGH: NC=25 (Measurement position: 1 m from the front of the unit), Operating temperature range: 0 - 40°C, Storage temperature range: –20 - 60°C